Filter
Top Products
3 - 39
1
OVERVIEW
2
SCREEN
CONFIGURATION
3
OPERATING PROCEDURE
OF MELSOFT NAVIGATOR
4
USING SYSTEM
LABELS
5
CREATING SYSTEM
BACKUP DATA
6
USING PROGRAM
JUMP FUNCTION
3.6 Setting Parameters
■ Setting network parameters
Network parameters for each controller can be set without opening respective parameter setting dialog
boxes.
1. Click the network module (QJ71LP21-
25) on "Configuration diagram A".
The parameters are displayed on the Input
Detailed Configuration Information window.
2. Set the parameters on the Input
Detailed Configuration Information
window.
Setting example
• Start XY : 0010
• Points : 32 Points
• Control CPU : -
• Network Type : MNET/H Mode
(Control Station)
• Group No. : 0
•Station No. : 1
3. Set the parameters for "Configuration
diagram B" following the same
procedure in the step 1 and step 2.
Setting example
• Start XY : 0020
• Points : 32 Points
• Control CPU : No. 1
• Network Type : MNET/H Mode
(Normal Station)
• Group No. : 0
•Station No. : 2
For setting parameters, refer to user’s
manuals of each CPU.
Click