Filter
Top Products
3.4.2 Creating module configuration diagrams
3 - 13
1
OVERVIEW
2
SCREEN
CONFIGURATION
3
OPERATING PROCEDURE
OF MELSOFT NAVIGATOR
4
USING SYSTEM
LABELS
5
CREATING SYSTEM
BACKUP DATA
6
USING PROGRAM
JUMP FUNCTION
3.4 Creating System Configuration Diagram
■ Creating module configuration diagrams for L series
For L series, create module configuration diagrams refer to this section.
Basically, L series module configurations can be created in a similar way to Q series.
For operations that differ from Q series, refer to the Point in this section.
● System configuration to be created
Create the following system configuration.
RS-232 adaptor
(L6ADP-R2)
LCPU
(L02CPU)
END cover (
L6EC)
IP address :192.168.3.38
IP address :192.168.3.39
<L module configuration diagram A>
Module configuration diagrams
Network configuration diagram
Ethernet (Network No.1)
GOT
(GOT1000)
<L module configuration diagram B>
LCPU
(L02CPU)
Power supply
(L61P)
Input module
(LX40C6)
END cov
er (L6EC)
Power supply
(L61P)
Input module
(LX40C6)