Filter
Top Products
3.4.2 Creating module configuration diagrams
3 - 19
1
OVERVIEW
2
SCREEN
CONFIGURATION
3
OPERATING PROCEDURE
OF MELSOFT NAVIGATOR
4
USING SYSTEM
LABELS
5
CREATING SYSTEM
BACKUP DATA
6
USING PROGRAM
JUMP FUNCTION
3.4 Creating System Configuration Diagram
● Creating FX series module configurations
When creating workspaces, select "FX Series Module Configuration" in the "Choose a Default Configuration"
dialog box.
For creating workspaces, refer to the following section.
3.3 Creating Workspaces
● Mounting modules
When a module is dragged onto the Module Configuration window, the mountable areas are displayed in light blue
as shown below.
● Supported CPU modules of FX series in MELSOFT Navigator
The following CPU modules of FX series are supported in MELSOFT Navigator.
• Main units
FX
3S, FX3G, FX3GC, FX3U, FX3UC
• Special block
Ethernet special function block (FX-ENET series)
• Special adapter
Ethernet communication special adapter (FX
3U-ENET-ADP)
For FX series, special blocks and special adapters are mounted to a main unit which combines power supply,
CPU, and I/O module. However, the following blocks and units can not be mounted: special blocks and special
units which do not contain related project or configuration software, and extension blocks which do not support a
function to check power supply capacity and I/O points.
● Parameters of special adapters
The parameters of special adapters can be set on the Input Detailed Configuration Information window.
The setting content is reflected to the parameter of a programmable controller project by performing parameter
reflection. For details of the parameter settings, refer to the following section.
Section 3.6 Setting Parameters
● Displaying module list window
The model name of special blocks of FX series compatible with MELSOFT Navigator are displayed on the Module
List window when the related software
are installed.
When using special blocks install the related software
*1
of each module in advance.
*1: The related software of FX-ENET series may be downloaded from MITSUBISHI ELECTRIC FA Global Website.
For the method of obtaining the related software, contact the store where you purchased the product.
Mountable area