Filter
Top Products
124 Installing Upgrades
www.dell.com | support.dell.com
Installing a Floppy Drive and Reattaching Cables
Small Form-Factor Computer
1 Snap the replacement floppy drive into the sled and ensure that it is
secure in the sled.
2 Gently slide the floppy drive into the computer until the tabs securely
click into position.
3 Connect the interposer board to the floppy drive.
4 Attach the power cable to the interposer board on the floppy drive.
5 Connect the strip cable to the DSKT connector on the system board.
Small Form-Factor Computer
6
Check all cable connections, and fold cables out of the way to provide
airflow for the fan and cooling vents.
7 Close the computer cover, reconnect your computer and devices to
their electrical outlets, and turn them on.