Filter
Top Products
54 Advanced Features
www.dell.com | support.dell.com
– Clock Speed indicates the core speed at which the
microprocessor(s) operates.
– Cache Size displays the size of the microprocessor's level 2 (L2)
cache.
• Diskette Drive A identifies the type of floppy drives installed in your
computer. With the standard cabling configuration, Diskette Drive A
(the boot floppy drive) is the 3.5-inch floppy drive installed in the top
externally accessible drive bay.
The Diskette Drive A option has the following possible settings:
– 3.5 Inch, 1.44 MB
– Not Installed
NOTE: Tape drives are not reflected in the Diskette Drive A option. For
example, if you have a single floppy drive and a tape drive attached to the
floppy drive interface cable, set Diskette Drive A to match the
characteristics of the floppy drive.
• Fastboot allows your computer to boot in 10 seconds or less. The
default setting is On. If you do not want your computer to skip certain
configurations and tests during boot, you may set this option to Off.
• Integrated Devices. This option configures the following devices
integrated with the system board:
Press <Enter> to configure these options as explained in the
following subsections.
– Sound determines whether the integrated audio controller is On
or Off. The default is On.
– USB Controller enables or disables the onboard USB controller.
The onboard USB controller is always enabled during the BIOS
boot process. When set to On, the onboard USB controller
remains enabled when control is passed to the operating system.
When set to Off, the USB controller is disabled when control is
passed to the operating system.
– Network Interface Controller determines whether the integrated
network adapter is On, Off, or On w/ MBA. The default is On. If
you select On w/ MBA, you are prompted to press
<Ctrl><Alt><b> at the Dell logo screen during computer
boot. A menu then appears that allows you to select PXE, RPL,
BootP, or NetWare as the active boot mode.