Filter
Top Products
Installing Upgrades 125
8 Enter system setup and update the appropriate Diskette Drive A
option to reflect the size and capacity of your new floppy drive.
9 Verify that your computer works correctly by running the Dell
Diagnostics.
Small Desktop and Small Mini-Tower Computers
1 If the replacement drive does not have the bracket rails attached,
remove the rails from the old drive by removing the two screws that
secure each rail to the drive. Attach the bracket to the new drive by
aligning the screw holes on the drive with the screw holes on the
bracket rails and tightening all four screws (two screws on each rail).
Floppy Drive Bracket Rails
2 Gently slide the drive into place until the tabs securely click into
position.
3 Attach the power and data cables to the floppy drive, and connect the
other end of the data cable to the connector labeled “DSKT” on the
system board.
1drive
2 bracket rails (2)
3screws (4)
1
3
2