Agilent Technologies E1441A Oven User Manual


 
Agilent E1441A SCPI Command Reference 131
Chapter 3
SCPI Command Quick Reference
The following tables summarize SCPI commands for the Agilent E1441A Function
/ Arbitrary Waveform Generator.
Command Description
CALibration :COUNt?
:SECure:CODE <new code>
:SECure:STATe 1 | 0 | ON | OFF, <code>
:SECure:STATe?
:STRing <quoted string>
:STRing?
:VALue <cal value>
:VALue?
:ZERO:AUTO 1 | 0 | ON | OFF
:ZERO:AUTO?
Query number of cal operations.
Enters a new security code.
Enables/disables the security code.
Queries the security state.
Lets you store info about your calibration.
Queries the cal string.
Sets the calibration value.
Queries the calibration value.
Enable/disable autozero mode.
Query autozero mode.
CALibration? Initiates the calibration process using
the cal valueset by CAL:VALue.
DATA VOLATILE
:DAC VOLATILE
:ATTRibute:AVERage? [<arb name>]
:ATTRibute:CFACtor? [<arb name>]
:ATTRibute:POINts? [<arb name>]
:ATTRibute:PTPeak? [<arb name>]
:CATalog?
:COPY <destination arb name> [,VOLATILE]
:DELete <arb name>
:DELete:ALL
:NVOLatile:CATalog?
:NVOLatile:FREE?
FORMat :BORDer NORMal | SWAPped
:BORDer?
MEMory :STATe:DELete 0 | 1 | 2 | 3
OUTPut :LOAD 50 | INFinity | MIN | MAX
:LOAD? MIN | MAX
:SYNC OFF | ON
:SYNC?
:TRIGger:IMMediate
:TRIGger:STATe OFF | ON
:TRIGger:STATe?
:TTLTrg<n>[:STATe] ON | OFF
:TTLTrg<n>[:STATe]?
Opt. 001: "Ext Trig" BNC output.
Opt. 001: Enables/disables "Ext Trig".
Opt. 001: Queries trigger state.
PHASe :ADJust?
:REFerence
:UNLock:ERRor:STATe OFF | ON
:UNLock:ERRor:STATe?
Opt. 001: Query the phase offset setting.
Opt. 001: Set zero-phase reference point.
Opt. 001: Enable/disable error reporting.
Opt. 001: Query error reporting state.