Filter
Top Products
76 Agilent E1441A SCPI Command Reference
Chapter 3
• The calibration message is stored in non-volatile memory and does not change
when power has been off or after a remote interface reset.
Example Enter calibration information to record the next calibration date:
CAL:STR 'Cal 4/4/YY, Due 10/4/YY'
Enter a calibration message to record the
cal date of April 4 and next cal due date
as October 4 (YY = year of due date).
:STRing?
CALibration:STRing? queries the calibration message and returns a quoted string
(or a null string " " if nothing is present).
Example Query the calibration message:
CAL:STR?
Query the calibration message.
enter statement
Enter value into computer.
:VALue
CALibration:VALue <cal_value> specifies the value of the known calibration
signal used by the calibration procedure. See “General Calibration/Adjustment
Procedure” on page 177..
Parameters
Comment • *RST does not affect the calibration value.
Example Enter the known value for the calibration source signal:
CAL:VAL 10.0
Enter calibration value .
:VALue?
CALibration:VALue? queries the present calibration value.
Example Query the calibration value:
CAL:VAL?
Query the calibration value.
enter statement
Enter value into computer.
Parameter Name Parameter Type Range of Values Default Units
cal_value numeric See Cal/Adj on page 177 none