![](http://pdfasset.owneriq.net/0/3c/03cbb79d-5073-4dca-95c4-0d8a91ff249a/03cbb79d-5073-4dca-95c4-0d8a91ff249a-bg2d.png)
Agilent E1441A Application Information 45
Chapter 2
determined by the sweep rate specified. Figure 2-9 shows the frequency
sweep operation with internal trigger source.
Use the following command to set the sweep trigger source:
TRIGger:SOURce IMMediate|EXTernal|TTLTRG<0-7>|BUS
See “Triggering the Function Generator” on page 52. for more information.
Figure 2-9. Frequency Sweep with Internal Trigger
sweep start
frequency
sweep time
sweep stop
frequency
Sweep Trigger Signal
(TRIG:SOUR INT shown)
Frequency Sweep Output