Filter
Top Products
Agilent E1441A Error Messages 151
Appendix B
Option 001 Phase-Lock Errors
-221 Settings conflict; cannot adjust phase in present configuration
The phase cannot be adjusted real-time if an arbitrary waveform is selected,
a modulation mode (other than burst) is enabled, or if burst is enabled with
a burst count other than infinity. Occurs only with Option 001 Phase-Lock.
580 Phase-locked loop is unlocked
The function generator has detected an "unlock" condition. You must
execute the
PHAS:UNL:ERR:STAT ON command to enable this error.