Agilent Technologies E1441A Oven User Manual


 
138 Agilent E1441A Specifications
Appendix A
System Characteristics Configuration Times
(2)
Function Change:
(3)
80 ms
Frequency Change:
(3)
10 ms
Amplitude Change:
(3)
30 ms
Offset Change: 20 ms
Select User Arb: 550 ms
Modulation Parameter
Change: <350 ms
Arb Download Times:
(1) Trigger source ignored when External Gate is selected.
(2) Time to change parameter and output the new signal.
(3) Modulation or sweep off.
(4) Times for 5-digit and 12-digit numbers.
(5) See “Option 001 Specifications” on page 139.
General Specifications Agilent E1441A Available Power (Amps):
+5V: peak measurement (Ipm): 0.50
dynamic measurement (Idm): 0.10
+12V:peak measurement (Ipm): 2.50
dynamic measurement (Idm); 0.12
Cooling/Slot:
Average Watts/Slot: 25.0
deltaP mm H2O: 0.10
Air Flow liters/s: 2.00
Operating Environment: 0° C to 55° C (Option 001 to 50° C
65% Relative Humidity to 40° C
Storage Environment: -40° C to 70° C
State Storage Memory: Four memory locations available (0, 1, 2 and 3)
Warm-up Time: 30 minutes
Programming Language: SCPI-1993, IEEE-488.2
Table 3-1.
Arb Length Binary ASCII Integer ASCII Real
(4)
16,000 points 8 sec 81 sec 100 sec
8,192 points 4 sec 42 sec 51 sec
4,096 points 2.5 sec 21 sec 26 sec
2,048 points 1.5 sec 11 sec 13 sec