Filter
Top Products
10-6 • E2 RX/BX/CX I&O Manual 026-1610 Rev 13 14-SEP-2011
Status screen functions are explained in more detail in
Section 12, Operator’s Guide to Using the E2 of the man-
ual. For now, press
to access another important
screen: the Actions menu.
10.7.3 The Actions Menu
The Actions Menu is available from any status screen
by pressing Enter
, and may be used to do just about
any task in the E2 system software. This screen lists a
number of options that can be used to affect a selected
field, an entire application, or the E2 in general.
One of the more important features of the Actions
Menu is the Setup screen
(Setup). The actual setup
screen will vary, depending on where the cursor is placed
in the Main Status (Home) screen before
is pressed.
This is the easiest way to edit an existing application.
For more information on usage of the Setup screen and
how to implement its functions, see Section 12.11.1.2,
Setup Screens.
Key Function for
RX
Function for
BX
Function for
CX
Suction Group AHU AHU
Condensers Zones Lighting
Standard and
Case Circuits
Lighting Circuits
Sensor Control
and
Power Monitor-
ing
Sensors Sensors
Setup Setup Setup
Table 10-2
- Status Screen Function Keys
Figure 10-10 - The Actions Menu
Actions Menu Item Description
Graph Opens graph view for the selected
value.
Log Opens the Log screen of the
selected value.
Override Opens the Override Update win-
dow where the selected input or
output can be overridden to a
user-defined value or state.
Expanded Information Displays detailed information
about the selected value.
Setup Opens the setup screen for the
selected value.
Detailed Status Special status screen that shows
detailed setpoints and input/out-
put information with complete
summary of inputs, outputs.
Manual Defrost For circuits only. Opens the Cir-
cuit Bypass screen to force a man-
ual or emergency defrost, or wash
mode.
Application Com-
mands
Allows Service Start/End for Irri-
gation and Pulse Accumulation
applications.
Applications Logs/
Graphs
• Opens various log and
graph screens for Anti-
sweat and Pulse Accumu-
lation applications.
• Opens the Circuit Report
screen for standard circuits
only.
Table 10-3
- Actions Menu Options and Descriptions