Filter
Top Products
10-20 • E2 RX/BX/CX I&O Manual 026-1610 Rev 13 14-SEP-2011
4. Call Retail Solutions Customer Service at 770-
425-2724 and have your MAC Address ready in
order to obtain your unique license key.
Once you have received your unique license key from
Customer Service, you can now activate the licensed fea-
ture(s) from the License Report screen. The License
Report screen displays that E2 controller’s unit type and
firmware version, the list of all licensed features on that
E2, the current number and maximum number of each of
those applications allowed, and which additional features,
(that require a license key), have been enabled.
From the Main Menu:
1. Press
(System Configuration)
2. Press
(Licensing)
3. Press (Add Feature)
Enter your license key to activate the desired feature:
4. Reboot the controller and open the License
Report screen again to see the license key appear
next to the activated feature (Figure 10-35):
10.15.1 Web Services
Web Services is a licensed feature that allows the user,
once the required license has been obtained and entered, to
view and adjust certain parameters in the E2 controller
through a Web page. The E2 Web Services feature enables
the user to:
• View site-specific information such site name, site
phone, local date and time.
• View the current version of the E2. This includes
the type of unit (e.g., RX-400) and the version of
Figure 10-33
- TCP/IP Screen - Locating the Mac Address
Figure 10-34 - Enter Your Unique License Key
Figure 10-35 - License Report Screen (BX-400 version shown)