Filter
Top Products
Wallboard Installation and Maintenance INDeX Wallboard 10
INDeX Contact Centre Modules Page 102
Installation & Maintenance 38HBK00001SCM - Issue 11 (05/01)
INDeX Wallboard 10
Introduction
The INDeX Wallboard 10 is a single line display consisting of 10 tri-colour
characters. It connects via a multi-drop circuit to the host PC running the INDeX
Wallboard Server application.
The display wallboard consists of the following assemblies.
Housing
A housing which is manufactured from an aluminum extrusion with anti reflective
polycarbonate screen and removable aluminum end caps.
Power Supply
This display has an in-built DC power. This power supply has been set to the
required AC voltage for the country of use.
Logic Control Board
Logic control board that receives RS485 serial data from the data RJ45 connector.
Installation
The display is supplied with 2 wall mounting brackets, ceiling mounting kit, PC
connection plugs and wall fixings.
The INDeX Wallboard 10 displays all come with a 2-metre power cable provided for
mains supply. Ensure the voltage requirement is compatible with the intended
mains supply, and that the supply rating is greater than 5 Amp.
There are two methods of hanging the displays.
Wall Mounting
Fix the 2 wall mounting brackets using the cavity fixings provided. The bracket is
angled to allow a 10 degree downward tilt to the display. Please ensure the
brackets are the correct way up. See Figure 6.
Fig. 6