Filter
Top Products
Change Server PC Name Server PC
INDeX Contact Centre Modules Page 75
Installation & Maintenance 38HBK00001SCM - Issue 11 (05/01)
3. Select the SDXArichiver and then click Configure.
Note
Configure – Displays the driver-specific data source setup dialog box that enables you to
change the configuration of an existing system data source. You must select the name of
a system data source from the list before choosing the Configure button.
4. In the Description box, enter the new Server name (e.g. if the PC name has
been changed to ARCHIVERSQL123, then in the above screen, SDXArchiver
on server ARCHIVERSQL changes to SDXArchiver on server
ARCHIVERSQL123).
5. In the Server box, enter the new server name (e.g. ARCHIVERSQL123), click
Next, the following screen appears:
6. Ensure “With SQL Server authentication using a login ID and password entered
by the user” is selected.
7. Enter the Login ID as sa, leaving the Password field blank.
8. Click Next, ensure SDXArchiver is selected, click Next.
9. Ensure “Let SQL Server ODBC driver choose the translation method” is
selected.
10. Click Next and then click Finish.
11. Click Test Data Source to ensure the configuration is created and then click OK.
Note
You MUST ensure to repeat the above procedure for the SDXRepository Data Source.
12. From the ODBC Data Source Administrator screen, click OK.
13. Switch the PC off, connect the PC to the Network, and switch the PC back on.