Filter
Top Products
5.2 Communication Setup
5.2.3 How to Set Up the Ethernet Connection
5 - 39
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SCREEN
CONFIGURATION
5
OPERATING
METHOD
6
FUNCTIONS
7
INTERNAL DEVICE
INTERFACE
FUNCTION
8
TROUBLESHOOTING
APPENDICES
IP address setting
The IP address setting on GX Developer is invalid.
Set the IP address by the 7-segment LED and rotary switch of the MELDAS C6/C64
side, referring to the next page.
(4) MELDAS C6/C64 side parameter setting
Set the IP address, gateway address, subnet mask, and port No. for the 7-segment LED and rotary
switch of the MELDAS C6/C64 side, and then check the settings.
For details of the parameter setting, refer to the following.
MELDAS C6/C64 NETWORK MANUAL BNPB2373 IV Setting the Ethernet IP Address
7-segment LED
Rotary switch