Filter
Top Products
8 - 17
8.6 Error Code and Error Message List
8.6.1 GOT error code list
504
Warning! Touch panel
needs replacement soon.
User notifies the touching count of the touch key that reaches
to more than 80 % of the setting time with the dedicated GS.
GOT can be restored by executing the addition times reset
function after replacing the touch key. Moreover, GOT can
also be restored by turning off the notification signal manually.
In such case, turn it OFF after changing the setting value to
the integrated value or more.
505
Warning! Built-in Flash
ROM needs replacement
soon.
User notifies the built in flash memory writing times which
reaches to more than 80 % of the setting time with the
dedicated GS.
The GOT must be replaced. In that case, the data backup and
the reestablishment of data are needed. Moreover, GOT can
also be restored by turning off the notification signal manually.
In such case, turn it OFF after changing the setting value to
the integrated value or more.
506
Warning! Backlight needs
replacement.
User notifies the backlight power on addition time that
reaches more than setting time with the dedicated GS.
GOT can be restored by executing the addition times reset
function after replacing the backlight. Moreover, GOT can also
be restored by turning off the notification signal manually. In
such case, turn it OFF after changing the setting value to the
integrated value or more.
507
Warning! Display section
needs replacement.
User notifies the display section power on addition time which
reaches to more than the setting time with the dedicated GS.
GOT can be restored by executing the addition times reset
function after replacing the display section. Moreover, GOT
can also be restored by turning off the notification signal
manually. In such case, turn it OFF after changing the setting
value to the integrated value or more.
508
Warning! Touch panel
needs replacement.
User notifies the touching count of the touch key that reaches
to more than the setting time with the dedicated GS.
GOT can be restored by executing the addition times reset
function after replacing the touch key. Moreover, GOT can
also be restored by turning off the notification signal manually.
In such case, turn it OFF after changing the setting value to
the integrated value or more.
509
Warning! Built-in Flash
ROM needs replacement.
Change the GOT.
User notifies the built in flash memory writing times which
reaches to more than the setting time with the dedicated GS.
The GOT must be replaced. In that case, the data backup and
the reestablishment of data are needed. Moreover, GOT can
also be restored by turning off the notification signal manually.
In such case, turn it OFF after changing the setting value to
the integrated value or more.
510
Clock data input out of
range
The value that is input as clock data is out of the input
enabled range.
In this case, the input value is not accepted.
Confirm the input range of the value to be input as clock data,
and input the proper value again.
Error
code
Error message Action
Channel
No.
storage