Filter
Top Products
5.3 Environment Setup
5.3.1 Environment setup dialog box
5 - 55
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SCREEN
CONFIGURATION
5
OPERATING
METHOD
6
FUNCTIONS
7
INTERNAL DEVICE
INTERFACE
FUNCTION
8
TROUBLESHOOTING
APPENDICES
Item Description
Font
Font Control
Select a font language used for monitoring.
When selecting Japanese (supporting Europe) or Chinese (Simplified) (supporting Europe), Latin characters are
displayed in one-byte characters.
Japanese: Japanese characters are displayed.
Japanese (supporting Europe): Japanese characters supporting European characters are displayed.
Chinese (Simplified): Simplified Chinese characters are displayed.
Chinese (Simplified) (supporting Europe): Simplified Chinese characters supporting European characters are
displayed.
Chinese(Traditional) (supporting Europe): Traditional Chinese characters supporting European characters are
displayed.
16dot Standard
Font
Select the font type of 16dot standard font.
[Gothic], [Mincho]
TrueType
Numerical Font
Select a font type of the TrueType numerical font.
[Gothic], [7-Segment]
Use Japanese
optional font
This item is available only when selecting Chinese (Simplified) or Chinese (Simplified) (supporting Europe)
for Font Control.
Do not check this item normally (when displaying in Chinese (Simplified) characters).
When checking this item, objects without Kanji region setting will be displayed in Japanese.
Authentication
Select an authentic method.
Select the same authentic method set in [System Environment] of GT Designer2.
File Output (Hard Copy
Function)
Select the output destination for the hard copy file.
• Default
• [Project Data Setting]
: Stores files in the virtual A drive (G1SgtHardcopy).
Refer to the following for G1SgtHardcopy.
Section 3.3.1 Resource data storage destination
: Stores files in the file output destination specified on the [Project Data Setting]
screen.