Filter
Top Products
6.12 System Alarm
6 - 34
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SCREEN
CONFIGURATION
5
OPERATING
METHOD
6
FUNCTIONS
7
INTERNAL DEVICE
INTERFACE
FUNCTION
8
TROUBLESHOOTING
APPENDICES
6.12 System Alarm
System alarm is displayed.
If system alarm is not set to project data, it can be confirmed with this dialog box.
1 Perform the following operation.
• Select [Tool] [System Alarm] from the menu.
• Right-click the mouse to select [Tool] [System Alarm] from the menu.
2 The System Alarm dialog box is displayed.
*1 Refer to the following manual for list of system alarm.
8.6 Error Code and Error Message List
About system alarm to be displayed.
• Only the error detected by GOT is displayed on the system alarm dialog box.
Set the system alarm to project data for confirming error of PLC CPU and
network.
• Error messages are displayed in English.
To display them in other languages, set system alarm in the project data.
Item Description
System Alarm*1 Error contents are displayed.
Displayed error message is cleared.
However, it is redisplayed when the error keeps occuring.
Clear