Filter
Top Products
8.6 Error Code and Error Message List
8.6.1 GOT error code list
8 - 18
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SCREEN
CONFIGURATION
5
OPERATING
METHOD
6
FUNCTIONS
7
INTERNAL DEVICE
INTERFACE
FUNCTION
8
TROUBLESHOOTING
APPENDICES
520
Insufficient Flash ROM
capacity
The capacity for the buffering area is insufficient in the build in
flash memory.
1. Confirm whether there are no mistakes in specified
buffering area size.
2. Install the option function board with add-on memory.
521
Insufficient user memory
(RAM) capacity
The capacity for the buffering area is insufficient in the user
memory (RAM).
1. Confirm whether there are no mistakes in specified
buffering area size.
2. Install the option function board with add-on memory.
522
Unnecessary file deleted
to create new file.
Cancelled the file of different contents and created a new file.
Note that the old file is cancelled and the new file is created if
the file of the same name with different contents exists when
creating files.
524
Device writing error.
Correct device.
When writing in the device, error occurred.
Correct the device.
525
Unable to read/write
alarm log files under
different projects.
Unable to read the alarm log file saved by the different
project.
Confirm where to store the alarm log file and alarm log file.
526 File conversion failed.
The file specified in file conversion does not exist.
Check the settings for specifying a file to be converted.
530
Improper monitor device.
Confirm monitor channel.
The channel of the specified monitor target does not exist or
the channel is not the monitor target.
Confirm the monitor target channel of the screen data.
535 Cannot open image file. Confirm whether any file exists in the memory card.
536
Image file error or invalid
file format.
1. Confirm whether the image file in the memory card is
normal.
2. Confirm whether any image file of invalid format is stored.
540
Auto repeat error. Confirm
system information.
Error occurred while executing the auto repeat function of the
touch switch object.
Confirm the followings.
1. Confirm that the other system error has not occurred during
auto repeat
2. Confirm that any error information is not stored in the
system information/GS during auto repeat.
570
Recipe device points too
large.
The number of the set points of the recipe device exceeds the
specified range.
Put the number of the set points of the recipe device within
the specified range.
571
Capacity shortage of user
memory (RAM)
There is no empty area/space in D drive.
Format the D drive in the memory to secure free area.
581
Abnormal Advanced
recipe file
Advanced Recipe cannot be executed for advanced recipe
file with incorrect contents. Delete the advanced recipe file
from the memory card.
Error
code
Error message Action
Channel
No.
storage