Filter
Top Products
5.2 Communication Setup
5.2.6 How to Set Up the YASKAWA PLC Connection
5 - 51
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SCREEN
CONFIGURATION
5
OPERATING
METHOD
6
FUNCTIONS
7
INTERNAL DEVICE
INTERFACE
FUNCTION
8
TROUBLESHOOTING
APPENDICES
(6) Settings on GT Designer2 and GT SoftGOT1000.
(a) Setting on GT Designer2
Set the Ethernet setting dialog box on GT Designer as shown below.
(b) Setting on GT SoftGOT1000
Set the communication setup dialog box of GT SoftGOT1000.
For details on the communication setting, refer to the following manual.
5.2 Communication Setup
Item Description Range
Host Indicate the host station. (The host station is indicated as *.) -
N/W No. Set the network number of the target Ethernet module. 1 to 239
PLC No. Set the station number of the target Ethernet module. 1 to 64
Type Select [YASKAWA]. YASKAWA
IP address Set the IP address of the target Ethernet module.
IP address of programmable
controller side
Port No. Set the port number of the target Ethernet module. 256 to 65534
Communication Select a communication method. UDP, TCP