Filter
Top Products
6.15 Application Start-up
6.15.2 Application start-up history
6 - 42
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SCREEN
CONFIGURATION
5
OPERATING
METHOD
6
FUNCTIONS
7
INTERNAL DEVICE
INTERFACE
FUNCTION
8
TROUBLESHOOTING
APPENDICES
6.15.2 Application start-up history
Information involving application start-ups can be stored in a history.
1 Information storable in a history
The following lists information storable in a history.
*1 This applies only for applications that are started up after [Activate an application in
motion] is selected in [Action of when startup condition satisfied].
2 Referring to history data
The following explains how to refer to history data.
1 Follow the procedure below.
• Select [Set] [Application Start-up History] from the menu.
• Right-click the mouse, and select [Set] [Application Start-up History] from the menu.
2 History data are displayed.
History data
Any application start-up history cannot be referred to when no history data are
stored.
To create history data, check [Create application start-up history] in the application
start-up setting.
For details of the application start-up setting, refer to the following section.
6.15.1 Setting method
Historical data are stored for each module as follows. They are not deleted even
when GT SoftGOT1000 is closed.
Delete unnecessary history data.
• Successful application start-ups • Erroneous application start-ups
• Activation processing of applications
*1
• Termination processing of applications
*1
2006/09/25 19:56:26 No.01 GS501.b0 : The application has been started.
2006/09/25 20:10:30 No.01 GS501.b0 : The application has been terminated.
2006/09/25 13:51:28 No.01 GS501.b2 : The application has been started.
2006/09/25 14:00:30 No.01 GS501.b2 : The application has been terminated.
2006/09/25 16:47:02 No.01 GS501.b0 : The application has been started.
2006/09/25 16:57:07 No.01 GS501.b0 : The application has been activated.
MELSOFT(installation folder)
SGT1000
Multi_SGT
No01
Application start-up history data
SoftGOT_AppliLog.txt