Filter
Top Products
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SCREEN
CONFIGURATION
5
OPERATING
METHOD
6
FUNCTIONS
7
INTERNAL DEVICE
INTERFACE
FUNCTION
8
TROUBLESHOOTING
APPENDICES
2.5 Connection Cable
2.5.1 Connecting to MITSUBISHI PLC
2 - 17
3 Connecting to QnACPU, ACPU, motion controller CPU (A series), or FXCPU
(1) Using the product of Mitsubishi Electric make
*1 A straight cable for conversion between 9-pin D-sub and 25-pin D-sub is required separately.
*2 How to distinguish products compatible with QnACPU, ACPU.
Check the model name label of the cable.
*3 When connecting the FX-232AWC-H to the FX
3UCCPU, transmission speed of 9600/19200/38400/57600/115200
bps is available.
When connecting the FX-232AWC or FX-232AW, either of transmission speed of 9600/19200bps is available.
*4 Drivers respectively stored in the CD-ROMs included in the FX-USB-AW and FX
3U-USB-BD must be installed on
the personal computer for using the converters. (The converters can be used by assigning the USB-serial
conversion driver to the COM number.)
PC side (RS-232 cable)
RS-232/RS-422
Converter
*3
PLC CPU Side(RS-422 cable)
(Use the cable included in the FX-USB-AW.)
(Use the cable included in the FX3U-USB-BD.)
F2-232CAB(3m)
*1*2
(For the 25-pin D-sub connector of the PC side)
FX-232AW
FX-232AWC
FX-232AWC-H
(FX series only)
FX-422CAB (0.3m), FX-422CAB-150 (1.5m)
(For connecting to QnACPU, ACPU, motion controller
CPU (A series), FX1CPU, FX2CPU, or FX2cCPU)
F2-232CAB-1(3m)
*2
(For the 9-pin D-sub connector of the PC side)
FX-422CAB0 (1.5m)
(For connecting to FX0/FX0S/FX0N/FX1S/FX1N/
FX2N/FX1NC/FX2NC/FX3UC/FX3U/FX3GCPU)
AC30N2A(3m)
*1
(For the 25-pin D-sub connector of the PC side)
FX-USB-AW
*4
(FX series only)
FX3U-USB-BD
*4
(FX3UC only)
F2-232CAB
Y990C*****
F2-232CAB-1
Y990C*****
F2-232CAB(F/FX/A)
Y990C*****
F2-232CAB-1(F/FX/A)
Y990C*****
Icompatible products Compatible products (with indication of F/FX/A)