Filter
Top Products
5 - 44
5.2 Communication Setup
5.2.3 How to Set Up the Ethernet Connection
(4) Setting on personal computer
Set the IP address.
(5) Communication check
(a) Ping test
When the CNC C70 is ready for communications, execute the Ping command with the
command prompt of Windows .
• When the Ping test is verified
C:
\>Ping 192. 168. 0. 19
Reply from 192.168.0.19:bytes=32 time<10ms TTL=32
• When the Ping test is not verified
C:
\>Ping 192. 168. 0. 19
Request timed out.
When the Ping test is not verified, check the connections of the cable and unit, and settings,
including the IP address, for Windows .
(b) Station monitoring function
For details on the station monitoring function, refer to the following manual.
GOT1000 Series Connection Manual
(6) Settings on GT Designer2 and GT SoftGOT1000
(a) Ethernet setting
Set the following in the Ethernet dialog box of GT Designer2.
For details of the Ethernet setting, refer to the following.
5.2.4 Setting on GT Designer2