Filter
Top Products
6 - 41
6.15 Application Start-up
6.15.1 Setting method
*1 Action of when startup condition satisfied
When a setting is changed while GT SoftGOT1000 is operating, the setting after change is valid only for
applications started up after the change.
For this reason, even when [Exit the applications when exiting GT SoftGOT1000.] is enabled, some applica-
tions may not be terminated simultaneously with termination of GT SoftGOT1000.
Example) When changed from [Activate an application in motion] to [Separately start
another application]
Example) When changed from [Separately start another application] to [Activate an
application in motion]
Timing of setting
and starting up
Images of application
starting up
Set to [Activate an application in motion]
Set to [Separately start another application]
Start-up
Start-up
Start-up
Simultaneous
termination with GT
SoftGOT1000
Store information involving
activation processing/
termination processing to the
application start-up history
Start-up
Active Active
Available
Available
Not available
The application currently
running must be terminated
before starting the same
application separately.
Set to [Activate an
application in motion]
Set to [Separately start
another application]
Start-up
Timing of setting
and starting up
Simultaneous
termination
with GT SoftGOT1000
Images of application
starting up
Not available
Start-up
Not available
Start-up
Start-up
Start-upStart-upStart-up
Active
Only (3) can be terminated simultaneously
Available only for (3)
The setting after change is valid only for
applications that are started up after
[Activate an application in motion] is set.
Store information
involving activation
processing/ termination
processing to the application
start-up history