Filter
Top Products
6 - 13
6.6 Mail Function
6.6.3 How to set up the mail function
6.6.3 How to set up the mail function
The following explains how to set up the mail function to send e-mail using GT SoftGOT1000.
1 Mail setup
Used to set the mail send destination and perform a mail transmission test.
1 Perform the following operation.
• Click (Mail Setup).
• Select [Set] [Mail Setup] [Mail Setup] from the menu.
• Right-click the mouse to select [Set] [Mail Setup] from the menu.
2 The Mail Setup dialog box is displayed.
(Continued to next page)
Item Description
Dial-up
Set whether or not to send e-mail via dialup.
(The default is [Manual].)
Auto
Check this radio button to send e-mail via dialup.
If [Auto] is checked, a connection to the mail server is made and e-mail is sent when the mail conditions are
established.
The connection to the server is canceled after e-mail is sent.
It is necessary to set [Entry,] [Retry,] and [Interval.]
Manual
(No dial-up)
Check this radio button to send e-mail without using dialup.
If [Manual] is set, the connection to the mail server is always active when e-mail is sent.
The connection to the server is not canceled even after e-mail is sent.