Filter
Top Products
5.2 Communication Setup
5.2.3 How to Set Up the Ethernet Connection
5 - 23
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SCREEN
CONFIGURATION
5
OPERATING
METHOD
6
FUNCTIONS
7
INTERNAL DEVICE
INTERFACE
FUNCTION
8
TROUBLESHOOTING
APPENDICES
(2) Compatible models
*1
*1 When using AJ71QE71, AJ71QE71-B5, A1SJ71QE71-B2 or A1SJ71QE71-B5, use a module or PLC CPU of
function version B or later.
(3) Ethernet module (QnA series) switch settings
Operation mode setting switch : 0 (online)
Automatic start mode : SW3 ON
When SW3 is ON, initial processing is performed independently of Y19 (initial processing request).
Communications are also enabled if the CPU module is stopped.
For the initial processing using Y19 (initial processing request), create the program for initial
processing while referring to the "For QnA Ethernet Interface Module User's Manual".
(4) Network parameter setting (Setting on GX Developer)
On the MELSECNET/Ethernet setting screen of network parameter, set the network type, starting
I/O No., network No., group No., station number and IP address.
Compatible models
AJ71QE71N3-T, AJ71QE71N-B5, AJ71QE71N-B2, AJ71QE71N-T, AJ71QE71N-B5T,
AJ71QE71, AJ71QE71-B5, A1SJ71QE71N3-T, A1SJ71QE71N-B5, A1SJ71QE71N-B2,
A1SJ71QE71N-T, A1SJ71QE71N-B5T, A1SJ71QE71-B5, A1SJ71QE71-B2
Item Setting screen example
Ethernet Parameters
IP Address Setting