Filter
Top Products
5 - 14
5.2 Communication Setup
5.2.3 How to Set Up the Ethernet Connection
(b) Routing Parameter Setting
Set the routing parameter in the Routing Information Setting dialog box of GT Designer2.
Up to 64 [Transfer Network No.]s can be set.
The same [Transfer Network No.] cannot be set twice or more.
The host (GOT) can access up to 64 [Transfer Network No.]s as a request source.
Routing parameter setting
Communication within the host network does not require routing parameter setting.
Refer to the following for details of routing parameter setting.
Q Corresponding MELSECNET/H Network System Reference Manual (PLC to PLC
network)
Routing parameter setting for the relay station
The PLC at the relay station also requires the routing parameter setting.
Refer to the following for routing parameter setting.
This section (4) Routing Parameter Setting
Item Range
Transfer Network No. 1 to 239
Relay Network No. 1 to 239
Relay Station No. 1 to 64