Filter
Top Products
5 - 48
5.2 Communication Setup
5.2.5 How to Set Up the OMRON PLC Connection
5.2.5 How to Set Up the OMRON PLC Connection
The setting method when connecting to an OMRON PLC is shown below.
For the PLC side setting, refer to the following manual.
GOT1000 Series Connection Manual
*1 Transmission speed supported by the PLC must be set.
*2 The settings on the PLC and GT SoftGOT1000 must be the same.
Item
*2
Setting
Transmission speed
*1
9600/19200/38400/57600/115200bps
Data length 7bits
Stop bit 2bits
Parity Even
Communication condition format Individual
Host link station No. 00