Filter
Top Products
Chapter 8
8-24 Respironics V200 Ventilator Operator’s Manual REF 1057983 A
Operating Instructions
Figure 8-25: Settings Screen (PCV settings, PCV not currently active)
3. Press the ACTIVATE button. The prompt in Figure 8-26 is displayed on
the screen.
Figure 8-26: Prompt when Activate is pressed and PCV settings selected
4. At this prompt the operator can:
• Move directly into PCV by pressing the OK button, or
• Review the PCV alarm settings, or
• Change nothing and return to the PCV settings screen by pressing
the CANCEL button.
If the OK button is pressed, the ventilator immediately begins
operations in PCV, the PCV settings become active and screen in
Figure 8-27(a) appears.
ACTIVATE
button
Press the OK button and go
to this screen.
(a)