Filter
Top Products
Chapter 4
4-22 Respironics V200 Ventilator Operator’s Manual REF 1057983 A
Getting Started
Patient Circuit Flex
Arm Installation
A patient circuit flex arm is provided for use on the ventilator. The patient
circuit flex arm may be installed on either the left or right side rail on the cart.
Figure 4-22: Patient Circuit Flex Arm Installation
Patient Circuit Flex Arm Installation Instructions
Refer to Figure 4-22.
1. Slide flex arm bracket (1) on to the side rail of the cart (one per side).
2. Tighten black screw knob (2) on flex arm bracket.
3. Insert base of flex arm (3) into flex arm bracket and tighten.
4. Place patient circuit hose clamp (4) into the flex arm clamp (5) and
tighten.
2
3
4
5
1