Options and Accessories
REF 1057983 A Respironics V200 Ventilator Operator’s Manual 13-47
Chapter 13
Flow trigger setting 2 1 1 – 20 LPM Outputs Flow
trigger setting of
active ventilation
type.
Not used N/A N/A N/A Outputs example
value.
Not used N/A N/A N/A Outputs example
value.
Not used N/A N/A N/A Outputs example
value.
Not used N/A N/A N/A Outputs example
value.
Not used N/A N/A N/A Outputs example
value.
Not used N/A N/A N/A Outputs example
value.
Not used N/A N/A N/A Outputs example
value.
Not used N/A N/A N/A Outputs example
value.
Not used N/A N/A N/A Outputs example
value.
Not used N/A N/A N/A Outputs example
value.
Not used N/A N/A N/A Outputs example
value.
Not used N/A N/A N/A Outputs example
value.
Measured end
inhalation pressure
20.0 0.1 or 1 0.0 – 99.9
100 – 130
cm
H
2
O
Outputs
when Ventilation
type is PCV or
NPPV, or
Ventilation mode is
CPAP or Spont, or
VCV Insp. Hold
setting = 0.
PCV Pressure Setting 100 15 – 100cm
H
2
O
Output 0 when
VCV is active, PCV
Pressure when
PCV is active,
when
NPPV is active
Ventilation Report
Description Example Resolution Range Units Comments
Table 13-4: Ventilation Report (Sheet 8 of 10)