Filter
Top Products
User Manual MON20/20 Software for Gas Chromatographs
3-9000-745 SEPTEMBER 2010
3-20
Figure 3-14. The Detectors window
2. Select the appropriate detector. It may be necessary to return to the
Chromatogram Viewer to learn which detector is the source of the
trace that needs to be offset.
3. To lower the baseline, click Left(N). Each time this button is clicked,
N is incremented by -1. For example, is this is the first time the
button has been clicked, Left(0) will be increment to Left(-1) and the
baseline will be lowered one step. If Right(N) was clicked previously,
then that button will be incremented by -1 first, until it reached
Right(0); at the point, Left(N) will be incremented by -1.
Note
To reset the baseline to its default setting, click Right(N) and Left(N) until they read
Right(0) and Left(0).