Filter
Top Products
User Manual MON20/20 Software for Gas Chromatographs
3-9000-745 OCTOBER 2010
2-40
2.6 Setting the gas chromatograph’s date and time
When MON 20/20 connects to a gas chromatograph, the Status Bar
displays the gas chromatograph’s date and time.
Note
The date and time displayed for the GC may be different from the user’s date and time,
depending on the physical location of the GC.
To set the gas chromatograph’s date and time, do the following:
1. Select View/Set Date Time... from the Chromatograph menu. The
View/Set Date Time window displays.
Integ. Stop Time, in seconds, when integration stopped.
Peak Width Half Height The width of the peak taken at half of the peak’s height.
Is Partial Peak If Y, then the Partial Peak value is used in the summation
calculation; if N, then the Partial Peak value is not used in the
summation calculation.
Name Description