Filter
Top Products
MON20/20 Software for Gas Chromatographs User Manual
SEPTEMBER 2010 3-9000-745
5-23
• Final Validation: For the most recent validation run, shows the
Nominal Value, Allowed Percent Deviation, and the Average Value of
each variable in the Validation Data table. See page 5-30 for an
example report.
Note
If the actual deviation is beyond the allowed amount, then the row will be flagged with
an *.
• Raw Data: Displays a list of data for each peak that was detected
during the run, including the retention time, peak area, and peak
height. See page 5-31 for an example report.
• Every Run: Displays a configurable list of calculations after each
run. See “Editing average calculations” on page 4-39 for more
information.
• Hourly: Displays a configurable list of average calculations each
hour, beginning at the time set in the Average Calculations window
at Application → Calculations → Averages.... See “Editing
average calculations” on page 4-39 for more information.
• 24 Hour: Displays a configurable list of average calculations each
day, beginning at the time set in the Average Calculations window
at Application → Calculations → Averages.... See “Editing
average calculations” on page 4-39 for more information.
• Weekly: Displays a configurable list of average calculations each
week, beginning on the day set in the Average Calculations window
at Application → Calculations → Averages.... See “Editing
average calculations” on page 4-39 for more information.
• Monthly: Displays a configurable list of average calculations each
month, beginning on the day of the month set in the Average
Calculations window at Application → Calculations →
Averages.... See “Editing average calculations” on page 4-39 for more
information.
• Variable: Displays a configurable list of average calculations every
hour at the time entered in the Hours column in the Average
Calculations window at Application → Calculations →
Averages.... See “Editing average calculations” on page 4-39 for more
information.