Filter
Top Products
User Manual MON20/20 Software for Gas Chromatographs
3-9000-745 SEPTEMBER 2010
3-44
Note
The analog output devices are labelled Analog Output 1 - Analog Output N by
default, where N equals the total number of analog outputs available to the GC.
12.Type in a new descriptive name for the analog output.
13.Click OK.
3.7.2 Setting a analog output’s operational mode
An analog output has two operational modes: Variable and Fixed.
• Setting the switch to Variable means that the analog output will be
proportional to the variable selected in from the Variables column.
• Setting the switch to Fixed means that the analog output will be set
to the value that is entered in the appropriate row under the Fixed
Value column.
To set an analog output’s operational mode, do the following:
1. Select Analog Output... from the Hardware menu. The Analog
Output window displays.
Figure 3-35. The Analog Outputs window