User Manual MON20/20 Software for Gas Chromatographs
3-9000-745 SEPTEMBER 2010
3-30
Note
The discrete outputs are labeled Discrete Output 1 - Discrete Output N by default,
where N equals the total number of discrete outputs available to the GC.
3. Type in a new descriptive name for the discrete output.
4. Click OK.
3.5.2 Setting a discrete output’s operational mode
A discrete output has three operational modes: Auto, On, and Off.
• Setting the discrete output to Off means that the discrete output will
turn off and remain off until the operational mode is changed.
• Setting the discrete output to Auto means that the discrete output
will turn on and off according to the Timed Events table or the
Discrete Outputs table.
• Setting the discrete output to On means that the discrete output will
turn on and remain on until the operational mode is changed.
To set a discrete output’s operational mode, do the following:
1. Select Discrete Output... from the Hardware menu. The Discrete
Output window displays.