Filter
Top Products
MON20/20 Software for Gas Chromatographs User Manual
OCTOBER 2010 3-9000-745
1-35
1.5.2 Saving a gas chromatograph’s current configuration
Configuration files are saved with the .xcfg extension. To save a GC’s
current configuration to a PC, do the following:
1. Select Save Configuration (to PC)... from the File menu. The Save
as dialog displays.
2. Give the file a descriptive name or use the pre-generated file name
and navigate to the folder to which you want to save the file.
3. Click Save.
1.5.3 Importing a configuration file
To import a new configuration into a GC or to restore a GC’s previous
configuration, do the following:
Note
The current configuration will be overwritten, so be sure to save it before importing a
new or previous configuration.
Note
The GC should be in Idle mode while performing this task.
1. Select Restore Configuration (to GC)... from the File menu. The
Open dialog displays. Configuration files are saved with the .xcfg
extension.
2. Locate and select the configuration file that you want to import and
click Open. The file’s data is loaded into the GC.