Filter
Top Products
User Manual MON20/20 Software for Gas Chromatographs
3-9000-745 SEPTEMBER 2010
4-68
3. Select a unit of measure from the Base Pressure Units drop-down list.
The options are:
•PSI
•Bar
•kPa
4. If you set the calculation method to GPA or GPA & ISO, you can also
set the following options:
• GPA Calculator Units (U.S. or S.I.)
• GPA Pressure Display (PSI, Bar or kPa)
5. If you set the calculation method to ISO or GPA & ISO, you can also
set the following options:
• ISO Pressure Display (Bar or kPa)
• Primary Temperatures
- 0C/0C
- 0C/15C
- 0C/20C
- 15C/0C
- 15C/15C
- 15C/20C
- 20C/0C
- 20C/15C
- 20C/20C
- 25C/0C
- 25C/15C
- 25C/20C
Note
Updating this field also updates the primary values—Sum Factor Pri, CV Superior Pri
and CV Inferior Pri—that display in the CDT.
• Secondary Temperatures (same options as Primary Temperatures)
Note
Updating this field also updates the secondary values—Sum Factor Sec, CV Superior
Sec and CV Inferior Sec—that display in the CDT.