Filter
Top Products
MON20/20 Software for Gas Chromatographs User Manual
SEPTEMBER 2010 3-9000-745
4-9
AGA 8 Component The name of the component according to the American Gas Association,
which is used in the AGA 8 compressibility calculation.
Ref Comp The component not found in the calibration gas but in the sample gas for
indirect calibration. If 'none', normal (direct) calibration is used.
Not editable unless the calibration type is set to Relative.
Rel Resp Fact A fixed multiple of the response factor of the component found in the
sample gas for indirect calibration.
Not editable unless the calibration type is set to Relative.
Rel Dens Liquid 15C
The relative density in kilograms per cubic meter (kg/m
3
) of the liquid
phase for the component at 15
°C.
Molar Mass The mass of one mole of the component.
Mult-level Calib 'a' Third-order polynomial coefficient for multi-level calibrations.
Not editable unless the calibration type is set to Multi-Level.
Mult-level Calib 'b' Second-order polynomial coefficient for multi-level calibrations.
Not editable unless the calibration type is set to Multi-Level.
Mult-level Calib 'c' First-order polynomial coefficient for multi-level calibrations.
Not editable unless the calibration type is set to Multi-Level.
Mult-level Calib 'd' Zero-order polynomial coefficient for multi-level calibrations.
Not editable unless the calibration type is set to Multi-Level.
Component Code An index number that corresponds to the standard component numbers
taken from the American Gas Association. Up to 20 components can be
defined per data table.
Parameter Description