Filter
Top Products
User Manual MON20/20 Software for Gas Chromatographs
3-9000-745 OCTOBER 2010
2-36
To update a timed event based on the location of the Chromatogram
Viewer’s cursor, do the following:
1. Select the live or archived trace that you want to use as the source for
changing the timed event.
2. Double-click on the graph to display the cursor. The cursor’s
coordinates display in the upper left corner of the graph. The x-
coordinate represents the analysis time in seconds. With this
information in mind, drag the cursor to the desired location.
Note
To toggle the cursor’s size between coarse movement (less accurate) and fine movement
(more accurate), click Cursor from the Graph bar.
3. Go to the Time Events table and right-click on the event.
4. Select Update Time from Cursor. The event’s time will be changed
to match the cursor’s time (x-coordinate).
5. To save your changes, right-click on the table and select Save
Changes. The changes will affect the next analysis run. To return to
the Timed Events table without saving your changes, select Discard
Changes.