Filter
Top Products
MON20/20 Software for Gas Chromatographs User Manual
SEPTEMBER 2010 3-9000-745
5-5
Figure 5-2. The Alarm Log window
The Alarm Log window supplies the following data for each alarm:
Name Description
Date Indicates the date and time at the GC when the alarm condition began.
Alarm Message Describes the alarm condition.
Status Indicates whether the alarm is SET (active) or CLR (inactive).
Type Indicates whether a high limit or low limit alarm was trigger:
• High means a high limit alarm was triggered.
• Low means a high limit alarm was triggered.
Limit Indicates the value that was set as the trigger for the alarm.
Value Indicates the current status value being output by the device.
Unit If applicable, unit of measurement for the displayed values.
Name Indicates the name of the variable that triggered the alarm.
User Indicates which user made the change.