Filter
Top Products
User Manual MON20/20 Software for Gas Chromatographs
3-9000-745 SEPTEMBER 2010
7-14
Figure 7-4. The Log Data window
2. Select the Enable Logging ‘Data’ Registers and Values check box to
enable data logging and to activate the Log Data Parameters
section.
3. Select a Logging Mode from the pull-down menu. You have the
following options:
• Continuous mode records the polled data continuously until the
connection is terminated or data logging is disabled by clearing
the Enable Logging ‘Data’ Registers and Values check box.
• Sampling mode records the polled data based on the time
interval that you set in the Time Interval between consecutive
logs text box. Time intervals can be set in seconds, minutes, or
hours.
4. Select a type of logging. You have the following options:
• Append adds this log to the file specified, preserving previously
logged data.
• Reset deletes the previously-logged data and saves only this new
log.
5. Click Save As.... The Save As window displays. The file can be saved
as a tab-delimited text file or a Microsoft Excel file. Type in a
filename and click Save.