Filter
Top Products
5 - 17 5 - 17
5.2.3 Uploading
When the ROM_BIOS or the OS is installed to the GOT, monitor data of the built-in memory are deleted.
To backup the monitor data, upload and save them temporarily in the PC hard disk.
The uploading method is as follows:
Click the [Communication] [Communicate with GOT].
The setting dialog box appears. Make settings referring to the description below.
After setting, click the Upload button to start upload.
Communicate with GOT dialog box (Upload Computer tab)
Item Description A F
Project configuration tree
Configuration of the obtained monitor data is displayed in a tree.
Right click the mouse to "Select All" or "Unselect".
Password
When the password for upload is set, input the password.
Each input is displayed as "
".
Upload path
Storage location of the uploaded monitor data is set.
(Up to 5 historical data specified in the past are retained.)
When data is uploaded in default (GT Designer2), the uploaded data are read into the
currently open GT Designer2.
Upload
Items checked in the project configuration tree are uploaded.
When the project configuration tree is not displayed, all monitor data of the GOT built-in
memory are uploaded.
If the space of the upload destination is not sufficient, uploading is interrupted.
Memory Information
Built-in memory information of the GOT is obtained.