Filter
Top Products
5 - 32 5 - 32
Transfer method of the OS, monitor data and special data is shown below:
Write method to PC card
Click the [Communication] [Communicate with PC Card].
The setting dialog box appears. Refer to the following descriptions for setting.
After setting, click the Write button to start writing to the PC card.
Communicate with PC Card dialog box (PC card write tab)
Item Description A F
Project configuration tree
The project configuration tree is displayed in a tree. Check the desired item for
downloading.
Right click the mouse to "Select All" or "Unselect".
SP/Motion path
OS install path
Path (drive, folder) that stores the data to be installed is specified.
(Up to 5 historical data specified in the past are retained.)
GOT type
The type of GOT to which the data is transfered is selected.
Available size
When the built-in memory information has the memory information of the GOT, the
available size for the user is displayed.
Monitor data
OS
SP/Motion
When the built-in memory information has the memory information of the GOT, the data
size used for each data is displayed.
PC card Drive assigned to the PCMCIA slot is selected.
Write
Data are written on the PC card.