Filter
Top Products
9 - 10 9 - 10
9.1.3 Batch editing attributes of objects/figures scattered on multiple screens
(Batch edit)
What is batch edit?
Color or other attributes of objects/figures are changed in batch.
The following attributes can be batch edited:
• Device of object • Color of object/figure
• Figure used for lamp display/touch switch
Convenient for the case below:
It is convenient to batch edit device, color or lamp/switch figure of objects or figures scattered on
multiple screens.
Different types of figures (circle and rectangle) or object (touch switch and value display) can be
batch edited.
The following types of batch edit are available.
Each change method and image after change are shown below.
<Image before change>
Base screen 1
Base screen 2
Base screen 3
<Image after change>
Batch editing all screens (Change of color: ) Batch editing screen (Change of color: )
Color of objects/figures on
all screens (Base screen 1,
Base screen 2, Base screen
3) is batch edited.
Color of objects/figures on
the editing screen (Base
screen 2) is batch edited.
Batch editing specified screens (Change of color:
)
Batch editing each category (Change of color:
)
Color of objects/figures on
screens for the specified
numbers (Base screen 1 to
Base screen 2) is batch
edited.
Color of the specified
category (Goto screen
switch) is batch edited.
Batch editing selected areas (Change of color: ) Batch editing common settings (Change of device)
Color of objects/figures on
the selected area in the
editing screen is batch
edited.
Devices (Switching screen
device, start trigger device
of hard copy, etc.) set in the
common settings are batch
edited.