Filter
Top Products
8 - 3 8 - 3
(5) Polygon
1) 2)
Drag from start point 1) to end point
2) of the first side, and release the
left button of the mouse.
3)
A dashed line is displayed. Click at
the end point of next side 3).
4)
5)
Repeat the operation in 3) until the
desired figure is drawn. Double click
4) to complete drawing.
(6) Arc
1)
2)
Drag from start point 1) to end point
2) to determine the radius of arc. A
dashed line is displayed inside the
circle.
3)
4)
Click the left mouse button at the
start point of arc 3), and move the
cursor to end point 4).
5)
Click end point 4) to complete
drawing.
(7) Sector
1)
2)
Drag from start point 1) to end point
2) to determine the radius of sector.
A dashed line is displayed inside the
circle.
3)
4)
Click the left mouse button at the
start point of sector 3), and move the
cursor to the end point 4).
5)
Click end point 4) to complete
drawing.
(8) Scale
Drag from start point 1) to end point 2), and release the left button of the mouse.
1)
2)
Draw while pressing the Shift key.
1)
2)
A scale with the same vertical and
horizontal sizes can be drawn.
Draw while pressing the Ctrl key.
1)
2)
start point
A scale can be drawn from the start point
as a center.