Filter
Top Products
8 - 8 8 - 8
8.1.3 Painting figures
Closed area and polygon are painted.
Before painting (filling)
Draw areas for painting as follows:
(1) Close the area to paint with solid lines.
Paint a polygon.
Paint this
area.
Paint this area.
Solid line
Solid line
Solid line
Solid line
Solid lineSolid line
(2) Use the same color for outlines of the area to be painted.
Paint this area.
Draw with the same color.
Paint this area.
Draw with the same color.
Remark
(1) Precautions for figure to be painted
(a) Note that any opening of the outline leads to protrusion of paint from the
edge of the figure.
(b) Inside of the figure drawn with the same boundary color as the background
color cannot be painted. Select a boundary color different from the
background color.
(2) Display of paint mark
Figures are not painted unless the paint mark is displayed on the screen.
The paint mark is displayed The paint mark is not displayed
on the screen. on the screen.
(3) Redisplay
If paint is used, unpainted areas may occur.
Redisplay provides correct display.
Refer to the following for redisplay.
3.4.5 Redisplaying drawing screen