Mitsubishi Electronics FX3U Coffeemaker User Manual


 
FX
3G
/FX
3U
/FX
3UC
PLC User's Manual - Positioning Control Edition
Built-in Positioning Functions
10 Variable Speed Operation (Variable Speed Pulse Output)-PLSV Instruction
10.2 List of Related Devices
B - 135
A
Common Items
B
Built-in
Positioning
Functions
Apx.
Example
Connection
Point:
To use an FX
3U Series main unit of relay output type, be sure to connect a high-speed output special
adapter. Differential line drive type outputs will be used for the outputs of the high-speed output special
adapter.
2 : When a high-speed output special adapter is used as a destination for pulse output on a FX
3U PLC,
use the output shown in the following table for rotation direction signals.
When a built-in transistor output is used as a destination for pulse output on a FX
3G/FX3U/FX3UC PLC,
use transistor output for signals rotation direction.
3:D
.b is available only in FX3U and FX3UC PLCs. However, index modifiers (V and Z) are not available.
4 : Only available for FX
3U and FX3UC PLCs.
10.2 List of Related Devices
1. Special auxiliary relays
The following table shows the related special auxiliary relays. Note that Y000, Y001, Y002, and Y003 are
devices that determine the pulse output destinations.
*1. Y002 is not available in 14-point and 24-point type FX3G PLC.
*2. Devices related to Y003 (pulse output destination) are only valid if two FX
3U-2HSY-ADP adapters are
connected to the FX
3U PLC.
*3. Only available for FX
3U/FX3UC PLC Ver. 2.20 or later and FX3G PLC.
*4. Cleared when the PLC switches from RUN to STOP.
High-speed output special
adapter connection position
Pulse output Rotation direction output
1st adapter
= Y000
= Y004
= Y001
= Y005
2nd adapter
= Y002
= Y006
= Y003
= Y007
Device number
Function Attribute Refer to
Y000 Y001
Y002
*1
Y003
*2
M8029 "Instruction execution complete" flag Read only Subsection 4.4.2
M8329
"Instruction execution abnormal end"
flag
Read only Subsection 4.4.2
M8338
*3
Acceleration/deceleration
*4
Drivable Subsection 4.3.9
M8340 M8350 M8360 M8370
"Pulse output monitor" (BUSY/READY)
flag
Read only Subsection 4.4.3
M8343 M8353 M8363 M8373 Forword limit Drivable Subsection 4.3.1
M8344 M8354 M8364 M8374 Reverse limit Drivable Subsection 4.3.1
M8348 M8358 M8368 M8378 Positioning instruction activation Read only Subsection 4.4.4
D
1
D
2
D
1
D
2
D
1
D
2
D
1
D
2