Filter
Top Products
FX
3G
/FX
3U
/FX
3UC
PLC User's Manual - Positioning Control Edition
Built-in Positioning Functions
4 Before Programming
4.1 List of Related Devices
B - 39
A
Common Items
B
Built-in
Positioning
Functions
Apx.
Example
Connection
M8347 M8357 M8367 M8377
Interrupt signal logic reverse
*3,*5
Drivable
DVIT
Subsection
4.3.8
M8348 M8358 M8368 M8378 Positioning instruction activation Read only
PLSY,PWM,PLSR,
DSZR,DVIT,ZRN,
PLSV,DRVI,DRVA
Subsection
4.4.4
M8349 M8359 M8369 M8379
Pulse output stop command
*3
Drivable
PLSY,PLSR,DSZR,
DVIT,ZRN,PLSV,
DRVI,DRVA
Subsection
4.3.2
M8460
*7
M8461
*7
M8462
*7
M8463
*7
User interrupt input command
*3
Drivable DVIT
Subsection
4.3.7
M8464
*2
M8465
*2
M8466
*2
M8467
*2
CLEAR signal device specification
function enable
*3
Drivable DSZR,ZRN
Subsection
4.3.4
Device number
Function Attribute
Corresponding
instructions
Refer to
Y000 Y001
Y002
*6
Y003
*1
*1. Devices related to Y003 (pulse output destination) are only valid if two FX3U-2HSY-ADP adapters are connected to the
FX
3U PLC.
*2. Only available for FX
3U/FX3UC PLC Ver. 2.20 or later and FX3G PLC.
*3. Cleared when PLC switches from RUN to STOP.
*4. Only available for FX
3U/FX3UC PLC Ver. 1.30 or later.
*5. For the user interrupt input command, the logical NOT function will not be activated.
*6. Y002 (pulse output destination) cannot be specified when the 14-point or 24-point type FX
3G PLC is connected.
*7. Only available for FX
3U and FX3UC PLC Ver.2.20 or later.